Cat6 Plenum Cable 550 Mhz 23 AWG Unshielded Twisted Pair ETL Listed

Cat6 Plenum Cable 550 Mhz:

This particular cable is a (read clearly with this link) category 6 cable that has a special plenum-rated outer jacket. What that essentially means is that this cat6 plenum cable is rated to be used in plenum spaces. This high-performance cable is tested and rated for all category 6 specifications that are required by the industry standards. However, this cable also exceeds some of the minimum base requirements of the industry. 

It is TIA/EIA verified, ETL listed and RoHS compliant cable capacitated to support high bandwidth capacity and high data transfer rates and to maintain a significant reduction in cross talks. It is highly recommended for applications necessitating better ability to reduce cross talk, high data transmission bandwidth, high data transfer rates, high data integrity, data protection, low bit error rate, excellent attenuation, and transmission speeds over longer distances.

This cat6 plenum cable complies with the highest market standards concerning category 6 cables. It is intended to support bandwidth capacities up to 550 MHz, and data transfer rates up to 1 Gbps.  We recommended this premium quality cable for 10BASE-T, 100BASE-TX Fast Ethernet, 1000BASE-T (IEEE802.3), 100VG-AnyLAN (IEEE802.12), 550mhz broadband video voice, T1, ISDN 155/ 622 Mbps, and ATM PoE (Power over Ethernet). 

Apart from the electrical specifications, this cable is rated to be used in plenum spaces for its jacket is plenum rated containing special fire-resistive materials. Plenum spaces are certain spaces in a building through which air goes around i.e. it circulates as a result of which oxygen in such spaces tends to be high. These high levels of oxygen make plenum spaces susceptible to catching fire. Our cables with CMP (plenum) rated jackets are specially designed for such spaces. They can effectively repel off fire progression, and they do not burn off with injurious-to-health fumes.

Furthermore, this (Buy Now) cat6 plenum cable features 23 American Gauge Wire, four unshielded twisted pairs and eight conductors in total. In simpler terms: it is made up of 8 wires twisted together in 4 unshielded pairs. The twisted pair design is a market standard that essentially is useful when it comes to cross talk and other electromagnetic interferences in transmissions, especially at higher frequencies. Cross talk refers simply to unwanted interruptions and distortions in a transmission which is detrimental to the data integrity of the transmission, and it leads to loss of data packets. It usually occurs when a signal from a cable bleeds and confuses with another signal from another cable. 

Apart from that, it can also be the due transfer of electrical energy between the conductors. Our cables are manufactured observing the standards and designs that help in reducing cross talk to a minimum acceptable level. For instance, this cat6 plenum cable is made of thick sheathing, and tight twisted pairs; all this help in cutting down several sorts of cross-talks like Power Sum Equal-Level Far-End Crosstalk (PS-ELFEXT), Near-End Crosstalk (NEXT) and Alien Crosstalk (AXT) and, likewise, other interferences.